REMOVAL & INSTALLATION

  1. Disconnect the negative battery cable.
    2.  
  2. Disconnect the electrical wiring from the oil pressure sender.
    3.  
  3. Remove the oil pressure sender from the engine.
    4.  

To install:
  1. Place a small amount of clean engine oil on the threads of the sensor and carefully insert and secure the unit.
    2.  
  2. Attach the electrical wiring to the sensor.
    3.  
  3. Connect the negative battery cable. Check the oil level and add fluid as needed.
    4.  
  4. Reset any digital equipment such as radio memory and the clock if necessary.
    5.