REMOVAL & INSTALLATION
See Figures 1 through 10
Refer to the necessary illustrations for removal and installation service procedures of the seat for your vehicle. Most front seats are mounted by seat track retaining bolts. Remove the bolts and lift the seats out of the vehicle. Tighten the front seat retaining bolts to 22-32 ft. lbs. (29-43 Nm). Some seat belt and trim disassembly may be required on certain models. On models where the rear seat cushion lower mounting is retained by clips, pull the front left and right levers forward and pull up the rear seat cushion.
 |  |
Fig. Fig. 1: Front seat mounting-1988-92 models
| |
Fig. Fig. 2: Front seat mounting-1993-97 models
| |
Fig. Fig. 3: Rear seat mounting-sedan
| |
Fig. Fig. 4: Rear seat mounting-coupe
| |
Fig. Fig. 5: Rear seat mounting-wagon
| |
Fig. Fig. 6: Rear seat mounting-split seat with child seat
| |
Fig. Fig. 7: To remove the lower seat cushion, pull out the tab ...
| |
Fig. Fig. 8: ... then pull the lower seat out
| |
Fig. Fig. 9: On the upper seat back, unbolt the assembly ...
| |
Fig. Fig. 10: ... and remove the upper seat back